Тeknetics T2 - CLASSIC - the lend is back again

The T2 is easier to learn to use properly than other comparable metal detectors. Its combination of light weight and balance provides comfort unmatched by any other detector in its price range. Its most popular uses include coin-shooting, relic hunting, and gold prospecting.

Тeknetics T2 - CLASSIC is without DST software. DST is only with Тeknetics T2 Ltd.

MULTI-MODE OPERATION
All Metal Mode for greatest depth
Discrimination modes to eliminate unwanted metals
Ground cancellation works in all modes

BIG EASY-TO-READ LCD DISPLAY
Straightforward Menu-Driven User Interface
Operating State always visible
Target ID, Depth Display, Battery Condition, Message Center, Mode Settings

BIAXIAL TM SEARCHCOIL
Penetrates all soils deeper
Iron-mineral soils
Conductive soil conditions
Salt-water beaches
11-inch open frame
 

DUAL-FUNCTION TRIGGER SWITCH
Pull for accurate target pinpointing
Push to cancel ground mineral interference

GROUND MINERAL DISPLAYS
Amount: Fe3O4 Bar graph
Type: Ground phase readout

PISTOL GRIP CONFORMS TO YOUR HAND
Durable foam cushion

2-WAY ADJUSTABLE ARMREST
Width- Sides can be bent inward to fit your forearm
Position- Armrest adjusts forward and backward
 

HIGH PERFORMANCE
ADJUSTABLE OVERALL LENGTH
LIGHTWEIGHT - 3.6 LBS. WITH BATTERIES
ERGONOMIC – WELL BALANCED

PRODUCT FEATURES
Large LCD Screen with Target Identification Display
Intuitive User Interface
Double – Filter Discrimination modes for searching in trashy areas
Ground Cancellation
Waterproof 11-inch Open-Frame Bi-Axial Search Coil
Low Operating Cost – Typically 40 hrs with 4-AA Batteries
 

SPECIFICATIONS

PHYSICAL

MECHANICAL: S-rod with electronics housing mounted on handgrip, 3-piece breakdown, batteries under elbow, 2-way armrest adjustment -- forward/backward & around forearm.

SEARCHCOIL: 11” (28 cm) open-frame elliptical double-D, waterproof

BATTERIES: 4 AA’s, alkaline or NiMH (not included).

WEIGHT: 3.5 pounds (1.6 kg) with alkaline batteries installed.

STATIC BALANCE: force in vertical plane normal to elbow .47 pounds (.22 kg). Varies with adjustment and user’s stance and arm/hand physiology.

DYNAMIC BALANCE: axial moment, .29 foot-pounds (.39 newton-meters).
Varies with adjustment and user’s stance and arm/hand physiology.

SWEEP EFFORT: lateral moment 5.2 foot-pounds (7.1 newton-meters).

 

OPERATING FEATURES

USER INTERFACE: Menu-driven. Entire menu is always visible. Where you are in the menu is always indicated.

ALL METALS MODE: first derivative (single-filter) motion.

DISCRIMINATION MODE: second derivative (two-filter) motion, with selection of target identification tones and sampling methods.

PINPOINT FEATURE: trigger-actuated, fully static (non-motion) with variable pitch.

GROUND CANCELLATION: trigger-actuated computerized, or manual.

VISUAL TARGET I.D.: 0-99 plus eight target category indicators.

MINERALIZATION READOUT: ground cancellation phase 0-99, and mineral concentration bar graph.

FREQUENCY SHIFTING: seven selections (to avoid electrical interference)



PERFORMANCE

OPERATING PRINCIPLE: VLF induction balance

OPERATING FREQUENCY: nominal 13 kHz, quartz crystal timing reference

BASIC SENSITIVITY: 5 x 109 root Hertz (detectivity)

LAG COEFFICIENT: 70 milliseconds

REACTIVE OVERLOAD: approximately 10,000 micro-cgs units (volume susceptibility)

RESISTIVE OVERLOAD: approximately 1,200 micro-cgs units (volume susceptibility)

GROUND CANCELLATION RANGE: From ferrite to salt, inclusive

DISCRIMINATION GROUND SUPPRESSION: combination of second and third order methods

ID GROUND SUPPRESSION: third order

BATTERY LIFE: typically 40 hours with good quality alkalines, somewhat less with NiMH rechargeables.

OPERATING TEMP RANGE: -4 to +122 degrees F (-20 to +50 degrees C)

OPERATING HUMIDITY RANGE: 0-90% non-condensing